Facebook linkedin linkedin

Ultrasonic Inspection using manual pulse echo techniques

UT Inspection is used for wall thickness measurement, welds inspection and detects volumetric defects.

These are normally applied to the structures in order to detect corrosion, erosion, internal defects such as laminations or inclusions.

They are also applied to welds to detect fabrication defects and when in-service to detect weld root erosion and fatigue cracks. These techniques rely on favourable orientation of the imperfections to be noted relative to the direction of the applied ultrasound. The geometry of the imperfection such as pitting is also a main consideration.

Copyright © 2021 Sonomatic Ltd
Dornoch House, The Links, Birchwood, Warrington, WA3 7PB
Tel: +44 (0)1925 414000  Fax: +44 (0)1925 655595
Member of the Institute of Corrosion
Sonomatic in partnership with:

Web Development by Verve Digital